Residential Furnace Installation & Replacement Services in Homer Glen, IL
Our Work in Homer Glen - 41 Reviews
Reviews
Great Job!
GREAT PEOPLE TO WORK WITH.
Professional & Courteous
New AC & Great Service
"Exceptional work at a very fair price"
The service was fantastic.
Excellent service and fair pricing
Job Site Visits
Found condensate line plugged with debris causing collector to fill with water causing furnace to malfunction.
Purged line with high-pressure Co2 cartridges. Pressure now reading 2.25 or higher.
Removed flame sensor - cleaned and tested.
Checked flame rollout switches, blower motor and draft inducer motor current - both excellent at 2.96 & .83 amperes respectively.
Tested pressure switch and operated furnace for solid 15 minutes with no further problems.
Humidifier water panel looks new. Humidifier operating properly.
Checked blower motor current draw and operation. Motor current nominal at 4.19 amperes, blower wheel spins freely, minimal lateral play. Wheel clean.
Burners spotless and well-kept, no debris. Perfect blue flame with light orange tip.
Removed and cleaned electrostatic elements and pre-filter. Pre-filters very dirty.
Replaced Honeywell model 300 humidifier water panel with client owned. Ensured drain lines clean.
1st floor: Found rattling noise being caused by power humidifier fan blade hitting water panel. Problem caused by broken/cracked fan motor mount. No repair possible. Will order new Aprilaire 700 type humidifier next business day and install.
All Furnaces: Checked draft inducer vacuum with manometer - pressures good.
Checked blower motor current - 3.75 amps very good.
Checked draft inducer motor current - .72 amps very good.
Replaced water panels in both units. Adjusted water flow to 2nd floor humidifier. Cleaned inside humidifier. Inspected blower wheel - both average cleanliness.
Found cabinet insulation inside 1st floor blow compartment loose and being drawn into blower wheel. Removed insulation.
Air filters installed backwards - showed client how to install. Advised to replace pleated filters monthly to avoid problems.
Humidifiers have outdoor temp capabilities. Client would like sensors installed. Will install during humidifier replacement call.
Tested Fan, AC and heat. All systems operational.
Furnace is over 25 years old. AC is 3-ton R22 Goodman. This is 1st floor HVAC systems. Recommend replacement in near future.
Checked with client following days. Client confirms all is well.
Replaced humidifier water panels where needed. Checked pressures, amperage, saftey and control circuits.
Replaced 1st floor humidistat.
Checked condensate drains, hoses, ports for blockage - non found.
Checked with client following day - system still operating properly.
Suspect evap coil may have small leak. Identical issue last year with main floor system. (Ended up replacing evap coil). Trying to seal using chemicals. Found ice beginning to build up on evap coil. System pressures very low. Vsat at 6.8 degrees. Advised client that if problem persists next year will replace evap coil.
Found condensate drain not glued at evap coil.
Unit is Rheem 3-ton R410a .
Outdoor ambient 90 degrees, relative humidity 85%.
Indoor ambient 86 degrees 58% humidity.
If your old furnace struggles to keep up with your home’s heating needs or is costing you too much in repairs and energy, it may be time to consider a new furnace installation. At Pinnacle Heating & Cooling, we specialize in professional furnace installation and replacement services in Homer Glen, IL, and the surrounding areas.
Whether you’re installing a furnace system for the first time, replacing a failing heating unit, or upgrading to a more high-efficiency model, our certified HVAC technicians are here to help. We offer expert guidance, transparent pricing, and dependable service backed by a satisfaction guarantee.
When Should I Replace My Furnace?
Most furnaces last 15 to 20 years, depending on furnace type, usage, and maintenance. But once your system reaches the end of its lifespan, performance and reliability decline.
Common signs it’s time for a furnace replacement include:
-
Frequent repairs or increasing service calls
-
Uneven heating or cold spots in the home
-
Rising utility bills due to poor efficiency
-
Strange noises or excessive cycling
-
Poor indoor air quality or buildup of dust
-
Visible rust, cracks, or outdated ductwork
-
System struggles to produce hot air during the winter season
-
Safety concerns like risk of carbon monoxide leaks
Replacing an old or unsafe heating system improves comfort, lowers energy costs, and gives you peace of mind heading into cold months.
Choosing the Best Furnace for Your Home
At Pinnacle Heating & Cooling, we help you choose the best furnace for your home based on your square footage, layout, fuel source, and comfort goals.
We install all types of furnaces, including:
-
Natural gas furnaces: Most common in Illinois homes, offering cost-effective heating
-
Propane furnaces: Ideal for homes without natural gas access
-
High-efficiency furnaces (AFUE rating of 90% or higher): Great for long-term savings
-
Electric furnaces: Require no gas line, suitable for some home setups
Our team will evaluate your current heating equipment, measure your home, and explain each furnace type so you can make an informed decision. We’ll also discuss additional costs, such as thermostat upgrades, ductwork adjustments, or gas line work, to provide a clear picture of the total cost.
Furnace Installation Done Right
Installing a new heating system is a major investment, but choosing the right contractor makes all the difference. With years of experience, our team at Pinnacle Heating & Cooling performs every installation with precision and care.
Here’s what to expect from our furnace installation services:
-
Initial consultation to assess your heating needs
-
Professional sizing and selection of the right furnace type
-
Safe removal of your old furnace and proper disposal
-
Expert installation, including gas and electrical connections
-
Integration with existing or updated ductwork
-
Post-installation testing for airflow, safety, and performance
-
Thorough walkthrough and answer to all your questions
-
Recommendations for future furnace tune-up and maintenance
We take pride in being one of Homer Glen’s most trusted HVAC companies, offering not only quality HVAC installation but also personalized service tailored to your needs.
How Much Does Furnace Replacement Cost?
The average cost of a furnace replacement in Homer Glen varies depending on the type of furnace, system size, and any additional costs like duct modifications or a new gas line.
On average:
-
Basic gas furnace installations range from $3,000–$5,000
-
High-efficiency systems can cost $5,000–$8,000 or more
-
Upgrades to thermostats or zoning may add to the total cost
While the installation costs may seem significant, investing in an efficient furnace pays off in the long run through lower energy bills, fewer repairs, and improved home comfort.
Replacing vs. Repairing Your Furnace
If you're wondering whether to repair or replace your heating unit, here are some guidelines:
-
If your furnace is under 10 years old and repairs are minor, a fix may be reasonable.
-
If you're facing frequent repairs or repair costs exceed 50% of a new unit, replacement services are more cost-effective.
-
If safety is a concern (e.g., a carbon monoxide leak), immediate heater replacement is the safest option.
We’re here to help you compare repair vs. new system installation so you can make the best choice for your budget and home.
Why Homeowners in Homer Glen Trust Pinnacle Heating & Cooling
Choosing the right team for your heating installation ensures your comfort, safety, and satisfaction. At Pinnacle Heating & Cooling, we deliver:
-
Experienced, licensed HVAC technicians
-
Transparent estimates and fair pricing
-
Detailed explanations and responsive customer care
-
Reliable products from trusted manufacturers
-
Flexible scheduling, including emergency service when needed
-
Long-term value and efficiency with every new furnace installation
-
Continued support through annual furnace tune-up services
We’re committed to doing the job right the first time, and our priority is your indoor comfort throughout the winter season and beyond.
Post-Installation Support & Maintenance
After your heater installation, we recommend routine maintenance to keep your system running at its best. Annual furnace tune-ups improve performance, reduce wear, and extend the life of your heating equipment.
Our team offers maintenance reminders, inspection services, and customized care plans to make sure your furnace system stays reliable year after year.
Serving Homer Glen and Nearby Communities
Pinnacle Heating & Cooling proudly provides furnace installation and replacement services in Homer Glen and the surrounding Southwest Suburban areas. Whether you’re upgrading your system or installing for the first time, we ensure a smooth process from start to finish.
Our local team understands Illinois winters, energy codes, and the unique needs of homeowners in this region. Trust us to recommend and install the right solution for your home’s size, layout, and comfort preferences.
Request Service or Schedule a Consultation Today
Ready to upgrade your home’s heating? Contact Pinnacle Heating & Cooling for professional furnace installation services in Homer Glen, IL. Whether you’re dealing with an old furnace, planning for efficiency, or concerned about safety, we’ll guide you through the process.
Give us a call or fill out a request service form to schedule your free estimate. Get the expert care and support you deserve—because your comfort is our mission.
Contact us today at:
Pinnacle Heating & Cooling
14007 S Bell Rd Ste 126, Homer Glen, IL 60491
(708) 301-0079
Directions From Homer Glen, IL
Location of Pinnacle Heating & Cooling