Contact Us

Our experienced team can help.

Residential Heat Pump Services in Homer Glen, IL

Our Work in Homer Glen -
41 Reviews

Reviews

Job Site Visits

Sal Esposito
11/11/2019
Furnace cutting out. Checked draft inducer vacuum - found pressure marginal to low at 170 to 160 causing pressure switch to cut out. Switch rated at 1.65 in hg.

Found condensate line plugged with debris causing collector to fill with water causing furnace to malfunction.

Purged line with high-pressure Co2 cartridges. Pressure now reading 2.25 or higher.

Removed flame sensor - cleaned and tested.

Checked flame rollout switches, blower motor and draft inducer motor current - both excellent at 2.96 & .83 amperes respectively.

Tested pressure switch and operated furnace for solid 15 minutes with no further problems.

Humidifier water panel looks new. Humidifier operating properly.
Sal Esposito
11/09/2019
Older model Lennox G2Q04 series with ribbon burners and 5-ton drive. Honeywell electrostatic air cleaner.

Checked blower motor current draw and operation. Motor current nominal at 4.19 amperes, blower wheel spins freely, minimal lateral play. Wheel clean.

Burners spotless and well-kept, no debris. Perfect blue flame with light orange tip.

Removed and cleaned electrostatic elements and pre-filter. Pre-filters very dirty.

Replaced Honeywell model 300 humidifier water panel with client owned. Ensured drain lines clean.
Sal Esposito
11/08/2019
Initial call for loud rattling noise coming from 1st floor furnace. Client asked for service to two furnaces.

1st floor: Found rattling noise being caused by power humidifier fan blade hitting water panel. Problem caused by broken/cracked fan motor mount. No repair possible. Will order new Aprilaire 700 type humidifier next business day and install.

All Furnaces: Checked draft inducer vacuum with manometer - pressures good.
Checked blower motor current - 3.75 amps very good.
Checked draft inducer motor current - .72 amps very good.
Replaced water panels in both units. Adjusted water flow to 2nd floor humidifier. Cleaned inside humidifier. Inspected blower wheel - both average cleanliness.

Found cabinet insulation inside 1st floor blow compartment loose and being drawn into blower wheel. Removed insulation.

Air filters installed backwards - showed client how to install. Advised to replace pleated filters monthly to avoid problems.

Humidifiers have outdoor temp capabilities. Client would like sensors installed. Will install during humidifier replacement call.
Sal Esposito
10/23/2019
Found manual fan control/limit improperly adjusted to below 90 degrees causing fan to constantly run. Call for heat voltages reading approx 11 volts. Using NEST Thermostat. Internally battery discharged. Found open W lead to thermostat. Re-purposed unused humidistat wires to connect C lead for constant power to thermostat and new W lead to thermostat.

Tested Fan, AC and heat. All systems operational.

Furnace is over 25 years old. AC is 3-ton R22 Goodman. This is 1st floor HVAC systems. Recommend replacement in near future.

Checked with client following days. Client confirms all is well.
Sal Esposito
10/21/2019
Replaced 2nd floor furnace with 2-Stage Variable-speed unit.
Sal Esposito
10/18/2019
Checked first and 2nd floor furnaces for winter season.

Replaced humidifier water panels where needed. Checked pressures, amperage, saftey and control circuits.

Replaced 1st floor humidistat.
Sal Esposito
10/12/2019
Installed new variable-speed 80% furnace and 15.5 SEER AC system
Sal Esposito
10/09/2019
Furnace inoperative. Low/marginal suction pressure on draft inducer pressure switch. Suspected switch defective. Found vacuum port from draft inducer had small amount of debris stuck in it. Cleared blockage, pressure increased immediately well above minimum to "make" switch.

Checked condensate drains, hoses, ports for blockage - non found.

Checked with client following day - system still operating properly.
Sal Esposito
07/11/2019
Large leak in 2nd floor uncased coil. Removed and replace. Evacuated and recharged to spec.
Sal Esposito
07/04/2019
Leak in system. Inspected for leaks at braze joints and inside coil using leak detector. None found. Injected leak detector. Ended up adding 3.5 lbs. R410a. About a 50% leakage by volume.

Suspect evap coil may have small leak. Identical issue last year with main floor system. (Ended up replacing evap coil). Trying to seal using chemicals. Found ice beginning to build up on evap coil. System pressures very low. Vsat at 6.8 degrees. Advised client that if problem persists next year will replace evap coil.

Found condensate drain not glued at evap coil.

Unit is Rheem 3-ton R410a .

Outdoor ambient 90 degrees, relative humidity 85%.

Indoor ambient 86 degrees 58% humidity.

When it comes to maintaining year-round comfort in your home, heat pumps offer an energy-efficient solution for both heating and cooling. At Pinnacle Heating & Cooling, we provide expert heat pump repair and installation services in Homer Glen, IL and the surrounding area. With years of experience, our professional technicians deliver high-quality workmanship tailored to your specific heat pump needs. Whether you need repair services, routine maintenance, or a new installation, we’ve got you covered.


Heat Pump Repair Services in Homer Glen, IL

If your heat pump system isn’t working properly, it’s important to address the issue quickly to avoid higher energy bills, poor performance, or further damage. Our heat pump repair services are designed to diagnose and fix issues fast. Common heat pump issues include:

  • Refrigerant leaks or low refrigerant levels

  • Strange noises or unusual noises

  • Short cycling or tripped circuit breaker

  • Frozen outdoor unit or outdoor coil

  • Malfunctioning electrical components

  • Inadequate heating or cooling in heating mode

Whether you need a simple repair or a more complex fix, our professional HVAC technician will restore your system to peak performance.

We also provide emergency repairs for unexpected system failures and prioritize excellent customer service and long-term reliability. All repairs are performed to manufacturer specifications, ensuring the safety and efficiency of your system.


Routine Heat Pump Maintenance Services

Prevent breakdowns, improve energy efficiency, and extend your system’s lifespan with professional maintenance service from Pinnacle Heating & Cooling. Our routine maintenance programs help detect small issues before they become major repairs. Benefits of regular maintenance include:

  • Enhanced energy savings and lower energy costs

  • Better indoor air quality with a clean air filter

  • Longer system lifespan and more consistent performance

  • Improved comfort during both summer and winter seasons

  • Continued coverage under your manufacturer warranty

Our annual maintenance visits include:

  • System inspection and performance testing

  • Refrigerant pressure check and top-off

  • Cleaning of coils and outdoor unit

  • Filter replacement and thermostat calibration

  • Verification of electrical components

With proper maintenance, your heat pump’s efficiency stays high, minimizing the chances of a breakdown and extending the unit’s operational life.


Heat Pump Installation in Homer Glen, IL

Looking to upgrade your current HVAC system or planning a new installation? Heat pumps are an ideal choice for homes in Homer Glen thanks to their energy efficiency and ability to deliver both heating and cooling.

At Pinnacle Heating & Cooling, we provide expert installation services for air source heat pumps customized to your home’s layout and square footage. Our HVAC contractor team works with you to:

  • Select the right type of heat pump for your climate and home design

  • Determine installation costs and explain any additional costs

  • Assess existing ductwork or design new distribution systems

  • Configure electrical wiring, controls, and thermostat integration

We help homeowners make informed decisions about system sizing, energy consumption, and compatibility with existing equipment such as water heaters or a central air conditioner. Our goal is to provide a long-term solution that delivers comfort and energy savings throughout the year.

All installations are performed by trained professional technicians and backed by our satisfaction guarantee. We also advise on Energy Star rated systems and smart-home integrations to further optimize your home’s comfort.


Heat Pump Replacement Services

A heat pump system typically lasts 10–15 years. If you’re experiencing frequent repairs, decreased comfort, or escalating energy bills, it may be time to consider a new system. Pinnacle Heating & Cooling specializes in heat pump replacement services in Homer Glen and can help you upgrade to a more efficient unit.

Signs you need a heater replacement include:

  • System age exceeding expected lifespan

  • Declining performance in heating mode or cooling mode

  • Constant or costly HVAC repair needs

  • Presence of outdated components that may pose risks like carbon monoxide

We’ll help you assess your current setup, recommend a new high-quality unit, and explain replacement costs in detail. Our team ensures that your new system meets your home heating requirements while reducing utility bills in the long run.

We also guide first-time heat pump buyers through the process and offer flexible options to fit different budgets and comfort goals.


Why Choose Pinnacle Heating & Cooling?

Among the many HVAC companies serving Homer Glen and the Surrounding Area, Pinnacle Heating & Cooling is known for our dedication to craftsmanship, transparency, and dependable results. Homeowners trust us because we offer:

  • Skilled and licensed HVAC professionals with years of experience

  • Accurate estimates on repair cost, total cost, and installation costs

  • Comprehensive services from heater repair to new installation

  • Prompt, respectful customer service and easy scheduling

  • Help with selecting the best heat pump for your needs and budget

We serve not just Homer Glen, but also neighboring communities with full HVAC support, including furnaces, water heaters, and central air conditioning systems.


Schedule Your Heat Pump Service in Homer Glen, IL

From heat pump repair services to routine maintenance and full system installation, Pinnacle Heating & Cooling is here to help you enjoy worry-free comfort. Don’t let heat pump issues or high energy costs disrupt your home life.

Request service today for any of the following:

  • Fast and effective repair services

  • Preventative maintenance service with full system checks

  • Professional heater installation and HVAC installation

  • Budget-friendly heat pump replacement with energy-efficient options

We’re proud to bring year-round comfort and peace of mind to Homer Glen homeowners. Call Pinnacle Heating & Cooling now and let us help you reduce your energy consumption, extend system life, and increase your home’s comfort with expert HVAC care.

Contact us today at:
Pinnacle Heating & Cooling
14007 S Bell Rd Ste 126, Homer Glen, IL 60491
(708) 301-0079

Directions From Sandy, UT
Directions From Homer Glen, IL

Location of Pinnacle Heating & Cooling
Location of Pinnacle Heating & Cooling